UTC050AB-EWR$ is 5.0" TFT LCD Module with 800*RGB*480 Resolution

It is a trasmissive normally white TFT with parallel Interface.

Controller IC used in TFT is RA8875

UTC050AB-EWR$ supports RTP (Resistive Touch Panel)


RA8875 is a text/graphic mixed display with 2 layers TFT LCD controller. It is designed to meet the requirement of middle size TFT module up to 800x480 pixels with characters or 2D graphic application. Embedded 768KB display RAM provides user a flexible solution for displaying buffer of almost application. Besides, optional external serial flash is capable to provide the up to 32x32pixels font bitmap for BIG5/GB coding. For graphic usage, RA8875 supports a 2D Block Transfer Engine(BTE) that is compatible with 2D BitBLT function for processing the mass data transfer. The advanced geometric speed-up engine provides user an easy way to draw the programmable geometric shape by hardware, like line, square, circle and ellipse. Besides, for different end-user applications, many powerful functions are integrated with RA8875, such as scroll function, floating window display, graphic pattern and font enlargement function. These functions will save user a large of software effort during development period.

產品規格

Symbol	Dimension	Unit
Module dimension	120.7 x 75.8 x 9.3	mm
Active Area	108.0 x 64.8	mm
LED Numbers	12 LEDs

電氣特性
模組

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Power Supply For Logic	VDD	-	3.0	5.0	5.5	V
Input High Voltage	VIH	-	0.7VDD	-	VDD	V
Input Low Voltage	VIL	-	VSS	-	0.3VDD	V
Supply Current	Idd	VDD=3.3V	-	-	-	mA

背光

Item	Symbol	Min.	Typ.	Max.	Unit
Luminance	L	220	280	350	cd/m2

Pin	Symbol	Type	Function
1	VSS	-	Ground
2	VDD	-	Power supply voltage.(3.3V)
3	BL_EN	H/L	Backlight control pin. H:On L:Off
4	RS	H/L	H: Data , L: Instruction.
5	/WR	H/L	In 8080 series, this pin is used as /WR signal (data write) , active low.
6	/RD	H/L	In 8080 series, this pin is used as /RD signal (Data Read) , active low.
7~14	DB0~DB7	H/L	Data bus line.
15	/CS	H/L	Chip Select input, Low active.
16	/RES	H/L	Reset signal
17	INT	-	Wait Signal Output This is a WAIT output to indicate the RA8875 is in busy state. The RA8875 can’t access MCU cycle when WAIT pin is active. It is active low and could be used for MCU to poll busy status by connecting it to I/O port.
18	INT	-	Interrupt Signal Output. The interrupt output for MCU to indicate the status of RA8875.
19	VLED+	H/L	Power supply for backlight driver.(3.0~5.0V)
20	VLED-	H/L	Power supply for backlight driver.(GND).